RDT Exoskeleton Tents

The RDT and RDT S tents are designed to be used in extreme weather conditions so the anchoring system ensures high stability and wind resistance. Even in rain or snow, the inner of the tent stays dry during set‐up, because the tent skin is pulled up and attached in one piece underneath the frame. Depending on the size two to five persons can set up these frame tents in less than 10 minutes. The robust tent needs a minimum of ground preparation and adapts well to the terrain due to the pull‐out base plates.

These are rapid deployment tents with an exoskeleton frame. The frame is made of black anodized aluminium profiles. The tent is made of airtight double-sided PVC-coated polyester fabric (1.10 kg/m²) and comes with a completely inflatable frame that is fastened with Velcro closures to the tent skin and floor. These weatherproof tents have a fully integrated structure with the tent skin and the groundsheet forming a single unit.

RDT exoskeleton shelter

Key benefits of RDT tents

  • Rapid setup, in less than 10 minutes
  • Resistant to atmospheric agents
  • Reduced transport and storage size and weight, packed in standard pallets
  • Withstands winds of up to 130/km/h and snow loads of up to 50 kg/m²

Application areas

Due to the quick mounting, the low requirements for the set‐up area, and many available extras this weatherproof tent can be used in extreme weather conditions as military tents, mobile field hospitals, first aid posts, accommodation, command posts, storage, etc.

Technical specifications

Base area 17 - 74 m²
Frame length 2.90 - 12.00 m
Frame width 5.80 - 6.20 m
Frame eaves height 2.20 - 2.40 m
Max. frame height 3.40 - 3.66 m
Tent eaves height 2.15 - 2.30 m
Tent max. height 3.15 - 3.40 m
Snow load resistance 50 km/m³
Wind resistance 100 km/h
Assembly personnel 2 to 5

Product description

Tent skin

The tent skin and the groundsheet are made of high-quality PVC-coated polyester fabric. They are joined by high-frequency welding; therefore, the seams are watertight. As a standard, the tent skin is flame retardant. Fabrics that meet different standards are available upon request. The tent is equipped with rear and front doors with entrance flaps, four passages for climatization, and cable passages as well as a window for each panel between two leg poles. On the outside, all necessary hangers and ropes are provided, and hanging points at the inside for the inner liner, roof mesh, lighting, etc. are standard. A broad ground skirting allows the use of sandbags etc.

Frame

The frame is made of specially designed anodized aluminum profiles; the connectors consist of die-cast aluminum. Independent of the tent size, the roof area of the frame comes readily assembled in one piece. Leg poles and extendable base plates are also pre-assembled and only need to be slipped on the corner connectors. For our RDT S range (vertical sidewalls), we designed a reinforced frame to help further improve wind resistance for the tent deployed in the harshest environments. The new tests certify that our RDT S tent series can withstand winds in gusts of up to 130 km/h and snow loads of up to 50 kg/m² with sunroof.

The tent comes with a complete frame, tent skin with integrated flooring, stakes to anchor the frame and tent skin, hammer, packing bags for tent skin, frame, and accessories.

Options and accessories

  • Fabric according to military standards
  • Additional side entrances or windows
  • Adapter to connect tents
  • Inner liner made of cotton, PU-coated polyester, or isolation fabric
  • Partition walls
  • Sunroof
  • Protection groundsheet
  • Hard plastic flooring
  • Lighting
  • Air conditioning
  • Heating
  • Connection module tent to tent
  • Connection module tent to vehicle/container
  • Entrance module
  • Lettering/branding

11 Items

Set Descending Direction
per page